| FEATURES: |
 |
- Tests : UTP. FTP.
Coax cables, two, three, or four wire pairs in
twisted pair cables and test
all category UTP cables and hardware.
- Verify end-to-end
connectivity per EIA/TIA 568 wiring standard.
- Detects wiring
problems : Opens, Shorts, miswires (Crossed,
Reversed, Split pair).
- Locates
wiring/connection errors (distance to the open
or shout)
- Measures cable
length
- Easy to use only :
One button to select the test and two lines
characters LCD display.
- Low battery, Auto
power off, long battery life (60 hours
continuous)
|
| SPECIFICATION: |
|
| Display |
Two
lines characters LCD display (16 characters
each) |
| Connector |
RJ45 and BNC |
| Category |
CAT3, CAT4,
CAT5 |
| Faults
Status |
Opens, Shorts,
Reversed, Crossed, Split Pair. |
| Test
Type |
TEST provides
a pass / fail report on the cable under
test. In
case a failure has been detected, the
display offers additional
diagnostic information.
LENGTH provides the length of each pair (in
case a twisted pair
cable is being tested).
WIRE MAP provides the detail wiring for the
cable. |
| Cable
Length |
Range 2 to 999
ft or 1.0 to 350 m.
Resolution 1 ft or 0.5 m.
Accuracy 5% + 3 ft or 5% + 1 m |
| Power |
6 pcs 1.5V
size AAA alkaline battery. |
| Input
Protection |
The inputs
withstand telephone ringing and loop
voltages. |
| Size
/ Weight |
152 mm x 72 mm
x 35 mm / Approx. 360 g |
| Environment
Conditions |
Operating : 0
℃ to +50 ℃ , Storage : -20 ℃ to + 60
℃ |
| Accessories |
Instruction
manual , Carry case , One UTP Category 5
patch
cable, One RJ45F - RJ45F female coupler,
Cable identifier #1 for the verification of
the wire map. |
|
|
|
