| FEATURES: |
 |
- Test a wide range
of UTP cables such as 10Base T , 100Base Tx ,
10Base 2 (Coax), 356A , TIA-568A , TIA-568B,
etc.
- Can tests for
wiring faults such as open, short , reversed ,
crossed and split wires.
- Can identify up to
4 different cables at one end by provided remote
identifiers.
- Double digital
14-segment LED and 4 pair LEDs clearly display
the fault status.
- Provided over
voltage (max.56V) protection to prevent damage
frommiss connecting to live circuit of
networking.
- Simple and
effective use.
- Auto power off
|
| SPECIFICATION: |
|
| Display/LEDs |
Double
digital 14-segment LED
Four FAIL (red) LEDs
Four Pass (green) LEDs |
| Connector |
RJ45, BNC |
| Cable
pairs tested |
1/2 , 3/6 ,
4/5 , 7/8 |
| Faults
status |
Open , Short ,
Reversed , Crossed , Split and Low Battery |
| Test
cable length |
Minimum : 1.2M
(4ft) ,
Maximum : 150M (492ft) |
| Power |
9Volt battery |
| Size |
170 x 52 x
38mm |
| Weight |
Approx. 180g |
| Environment
Conditions |
Operating : 0
℃ to +50 ℃
Storage : -20 ℃ to +60 ℃ |
| Accessories |
Instruction
manual, One patch cable (RJ-45 to RJ-45,30cm
long) &
One remote identifier #1(Optional for A #2,
#3 & #4 )
(Optional for B #5, #6, #7 & #8) |
|
|
|
