|
Version
|
Picture
|
Feature
|
View
|
|
|
 |
- High Resolution DC/AC 10mA
- 23 mm Large Jaw Diameter
- One Touch Zero for DCA adjustment
|
|
CM-02/04
Clamp Meter/Automotive Clamp
|
 |
- DC/AC 0.01A Resolution
- AC/DC 0.01A~200A
- 23mm Jaw Diameter
- One Touch Zero
- Temperature and Capcitance
- Auto Range V、 W
、Hz、 ℃
、
- 3 3/4 Digits (4000 Counts)
- 0~9999 RPM(CM-04)
|
|
CM-03
Leakage Current Tester
|
 |
- 10 m A Ultra High Resolution
- Large Conductor Diameter (30mm)
- ACA 5 Ranges (40mA, 400mA, 4A,
40A, 100A)
|
|
CM-05
AC / DC Current Probe
|
 |
- Accurate and High Resolution
- 23 mm Conductor Diameter
- One Touch Zero
|
|
CM-07
TRMS AC / DC Clamp Meter
|
 |
- High Resolution DC 10mA, AC 1mA
- True RMS
- Non-contact Current Frequency
Measurement
|
|
PROVA-11
AC / DC mA True RMS Clamp Meter
|
 |
- Super High Resolution DC 1mA,
AC 0.1mA
- One Touch Zero for DCA
- True RMS
-
|
|
PROVA-15
AC / DC mA Current Probe
|
 |
- High Resolution DC 1mA, AC 0.1mA
- Connect to an Oscilloscopes to observe
Current Waceform
- Connect to Chart Recorder/Datalogger/
DMM to Record Current Data
|
|
PROVA-2000/2003
AC / DC Clamp Meter
|
 |
- DC/AC 2000A
- Cable f 55mm, Bus Bar 72mm(D) x 22mm(W)
- True RMS (2000)
- Average Sensing (2003)
- DCA One Touch Zero
- Auto Range A, V, W
- Continuity
- Max/Min/Hold
|
|
PROVA-2009
AC/DC True RMS WATT CLAMP
|
 |
- AC+DC 1200KW
- DC/AC 2000A & ANALOG OUTPUT
- Cable F 55mm
- True RMS
- Temperature ( ℃ or ℉ )
- 0.1 ℃ / ℉ Resolution
|
|
TES-3010/3012
Prof. Clamp Meter
|
 |
- ACA: 20A, 200A, 600A
- Continuity Buzzer
- Unit & Sign Display
|
|
TES-3040
AC 1000A Clamp Meter
|
 |
- 3-3/4 Digital LCD with bar-graph
- Auto-power off with Data Hold and MAX/MIN
mode
- Zero Adjustment/Relative Reading
|
|
TES-3050
AC /DC 1000A Clamp Meter
|
 |
- 3-3/4 Digital LCD with bar-graph
- Auto-ranging off / Data Hold / Peak Hold
/ MAX/MIN mode
- Zero Adjustment/Relative Reading
|
|
TES-3074
AC 1000A Clamp Meter
|
 |
- Capacitance Measurement (400μF).
- MAX / MIN / Data Hold.
- Phase Rotation Indicator.
- Pos Peak Hold & Neg Peak Hold.
- 1000A AC & 600V AC.
|
|
TES-3079
HVAC Trms Clamp Meter (1000A)
|
 |
- Check current draw in motors and compressors.
- Use MAX/MIN/Recording in the temperature mode to
assess efficiency.
- Test run/start capacitors.
- Confirm low voltage control signals.
- Measure flame safeguard device current draw.
|
|
TES-3082
True RMS Clamp Meter
|
 |
- Auto-Ranging Frequency measurements
- Auto ZERO mode
- Data Hold mode
- PEAK Hold mode
- True RMS Reading
|
|
|
|
 |
- 3-1/2 Digital LCD, 2000 count.
- Pocket size.
- MAX hold / Data hold function.
|
|
TES-3092
AC / DC 700A Clamp Meter
|
 |
- 3-1/2 Digital LCD, 2000 count.
- Pocket size.
- MAX hold / Data hold function.
- One touch DCA zero.
|
|
